How to choose facial cleansing tools? Uno spoon, tweezers, Vidal needle and others


Design Features

Structurally, the Vidal loop is simply simple. The tool is a compact metal loop on a rod with a protruding handle-holder. Sometimes the device is made to look like a flat spoon with a hole inside. The Vidal loop is made of metal. It is best to choose options made from medical steel. The special alloy guarantees safe use of the tool.

Cleaning the face with a needle: tools

When cleaning the face, the cosmetologist works with his hands or uses tools with a needle: a Uno spoon, a Vidal needle and a spoon needle. The Uno spoon is a kind of “strainer”, a spoon with small holes. By pressing it on the skin, you can get rid of superficial comedones in a small area with one simple movement. The Vidal needle is the main tool used to clean the face with a needle at home or in a salon. It is a knitting needle with a pointed end. Spoon loop - a knitting needle with a loop or a hollow ring at the end. It is applied along the contour of a deep acne and pressed so that the contents of the inflammation come out. Instruments for the procedure must be made of medical steel and thoroughly sterilized. If the procedure is carried out at home, it is better if they are individual.

Indications for use

The Widal loop is intended for mechanical skin cleansing procedures. The device is pressed in the area of ​​pores or active inflammation. This helps remove defective contents out. This treatment allows you to deeply cleanse pores, remove blackheads, remove blackheads, comedones, and pimples. The loop is used to eliminate such defects on the face and body.

Attention! Compliance with the rules for using the tool allows you to eliminate the occurrence of post-acne problems after cleaning. This is important for preserving the aesthetics of appearance and accelerating healing.

How to use it correctly?

First you need to prepare your face. The skin should be clean. You can make a cleansing mask with clay . In addition, it is necessary to disinfect instruments . Upon completion of the procedure, you need to carry out a number of skin care measures.

Step-by-step instructions for use:

  1. Cleanse skin of makeup.
  2. Wash with gel or foam.
  3. Prepare a decoction of chamomile flowers. Bow your head over the steam. Steam the skin for 10-20 minutes . You can also steam with a hot towel. Dip it in the broth, squeeze it out and put it on your face. Hold for 10 minutes. In case of rosacea, steaming is not carried out.
  4. Wipe the skin dry with a disposable napkin.
  5. Disinfect the needle.
  6. Place exactly in the middle of the pimple or blackhead.
  7. Pierce carefully.
  8. Apply a cotton swab with a disinfectant. Chlorhexidine, alcohol or another liquid will do
  9. Squeeze out the pimple with your hands or using a loop. Everything must be pre-disinfected. The loop is placed on the pimple so that it is in the center . Then you need to apply pressure.
  10. Disinfect the wound.
  11. Process the instruments and continue the procedure.

Preparation for the procedure

It is important to keep the Vidal loop clean. Before and after use, the instrument must be disinfected. The device can be treated with standard alcohol.

It is recommended to wipe the skin with an antiseptic before using the loop. For oily skin, you can use alcohol and chemical-based lotions. For dry, sensitive skin, it is better to use a chlorhexidine solution as an antiseptic.

Before the cleaning procedure using a cosmetic loop, the surface to be treated is thoroughly cleaned of cosmetics and other contaminants. It is recommended to use mild detergents (without scrubbing particles).

After cleansing, it is advisable to steam the skin. It is acceptable to simply take a hot bath or shower without using additional products. The best option: a steam bath with a decoction of medicinal herbs. Suitable raw materials (chamomile flowers, calendula, sage leaves, coltsfoot, nettle, celandine) are poured with boiling water and left for 3-5 minutes. They bow their heads over the dishes with liquid and cover them with a towel. After 10 minutes, stop steaming and remove moisture from the skin with a clean napkin.

It is recommended to additionally wipe the surface with chlorhexidine. If you are prone to rosacea, steaming is not performed (you can limit yourself to taking a warm shower).

Facial skin care after the procedure

After cleaning with a Vidal loop, apply an antiseptic compress. A mask with holes for the eyes, nose and mouth is cut out of gauze and moistened with alcohol or Chlorhexidine. Apply to the face for 20 minutes.

A similar compress is made for other areas of the body that have undergone cleansing. It extinguishes inflammation, has a disinfecting effect, and relieves redness.

Antiseptic compress

But if your facial skin is dry and sensitive, this compress will not work. It will dry out the skin and cause peeling. In this case, instead of alcohol products, decoctions of medicinal herbs are used to treat gauze: chamomile, calendula. They act much more gently, soothe, and quickly extinguish inflammation.

Using the tool

They begin working with the instrument after preparing the skin and the device. You can learn how to use a stick correctly from numerous videos posted on the Internet. The loop is placed over the contaminated pore or pimple. The center of formation should be in the middle of the hole of the tool. The loop is held parallel to the surface of the skin.

After the instrument is positioned correctly, gently press the loop onto the surface. The contents of the defect come out. If you want to extract the contents of deep subcutaneous pimples, you will have to additionally use a Vidal needle.

The tip pierces the surface. It is recommended to find the mouth of the nearest pore and try to move the hole apart without causing unnecessary damage. Then perform standard loop manipulation.

After processing each element, the skin at the site of the impact is disinfected and the instrument is disinfected. Following hygiene rules, continue processing the following defects. After completing the cleansing of the integument, the surface is completely wiped with an antiseptic.

Advice. To achieve maximum anti-inflammatory, disinfecting, drying, soothing effect, apply a compress. You can use ready-made fabric-based masks or use gauze soaked in alcohol or chlorhexidine (selected according to your skin type).

Step-by-step instruction

Before the procedure, it is recommended to thoroughly prepare your facial skin - it should be thoroughly cleansed. You can apply a clay mask to your face, which begins to draw out the contents of the pores.

The end of the needle should be disinfected.

Cleaning the facial skin with a Vidal cosmetology needle involves preliminary preparation of the skin. Here's how to use a Vidal needle step by step:

  1. Wash your face with water to remove makeup.
  2. Use gel or foam for washing.
  3. Steam your face for 20 minutes with chamomile infusion. You can use a hot towel. To do this, you need to wet it with chamomile decoction, squeeze it and apply it to your face for 20 minutes. If you have rosacea on your face, steaming is not recommended.
  4. Dry your face thoroughly with a clean napkin.
  5. Disinfect the instrument.
  6. Place the point of the needle directly in the middle of the pimple or blackhead.
  7. Gently pressing the needle, pierce the surface of the pimple.
  8. Use a cotton pad treated with an antiseptic to treat the wound. Chlorhexidine or rubbing alcohol can be used.
  9. Then you need to carefully squeeze out the sebum from the blackhead with your hands or using a loop. If a loop is used, it must be treated with alcohol and applied to the pimple so that it is in the center. Press gently.
  10. Once again disinfect the skin area with an antiseptic.
  11. After squeezing out each pimple, treat the instrument with Chlorhexidine solution or alcohol.

    facial skin cleansing

Healing period

It is recommended to perform the procedure in the evening. After cleaning, you should not go outside or actively sweat. It is recommended to avoid contact of fabrics with water. It is advisable to relax and provide your body with a healthy night's sleep.

By morning, any possible redness will subside and the damage will heal. You can perform regular washing, which is recommended to be supplemented with the use of an antiseptic, lotion or decoction of medicinal herbs. The skin can be lubricated with your usual cream. It is recommended to avoid full makeup (foundation, powder, blush) for 1–2 days.

After the procedure, it is not recommended to engage in sports, visit the bathhouse or swimming pool for 1–2 days. After washing, use an antiseptic, lotion or herbal decoction. It is recommended to switch to medicinal cosmetics, which will be selected correctly by a cosmetologist.

Cleaning the face with a needle: procedure


Cleaning the face with a needle: procedure

Facial cleansing with a needle is carried out according to an algorithm. Careful observance of order and sterility at all stages is important. 1. Preparing the site. To carry out the procedure, choose a carefully lit place, usually with the help of additional lamps. It should be equipped with a magnifying glass or mirror; if cleaning is carried out independently, everything should be covered with disposable sterile wipes and disinfected, and hands should be cleaned with antibacterial soap. Specialists in the salon additionally use sterile gloves. 2. Skin preparation. Cleansing from cosmetics and sebum using foams and gels is the first stage. Then, using a steam bath or a warming mask, the pores are opened, and manipulations can be carried out. A steam bath at home is carried out over a basin or wide bowl of water with essential oils or a decoction of herbs. In the beauty salon there is a special evaporator for this stage. Steam your face for no more than 5 minutes if your skin is normal and 7-10 if you have oily skin. 3. Direct cleaning. First, less contaminated areas of the skin on the periphery of the face are treated, gradually approaching the center. For the wings of the nose, use a Uno spoon. Facial cleansing with a needle is applicable to areas affected by inflamed and deep acne. Using a Vidal needle, the pimple is shallowly pierced, and then the contents are gently squeezed out using your fingers (not nails!) or a loop. 4. Final stage. After removing impurities, the skin is wiped with an antibacterial liquid and a soothing mask is applied.

Precautionary measures

Mechanical cleaning is contraindicated in cases of serious impairment of tissue regenerative abilities. The procedure is also not performed if:

  • some dermatological problems (exacerbation of dermatitis, psoriasis, eczema);
  • irritations on the surface (burn, allergy);
  • excessive dryness of tissues, severe peeling of the integument;
  • presence of rosacea;
  • infectious diseases of the integument.

It is not recommended to carry out cleaning if you are feeling unwell. The condition will slow healing and may contribute to the development of complications. Among which are:

  • slight redness of the surface;
  • damage to tissues and capillaries;
  • addition of infection.

Important! The likelihood of side effects increases if the rules for working with the loop and hygiene requirements are violated. Movements must be precise and careful.

Opinion of cosmetologists

Doctors actively use professional cleaning tools. Many people see an effective result and praise the device. Some cosmetologists accept only modern technologies and refuse to use mechanical cleaning methods.

The cosmetologist recognizes the procedure as painful, but effective.

The cosmetologist recognizes the option as ideal for cleaning.

The cosmetologist calls the option an outdated method of cleaning.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends: