One vector lifting procedure - and a second youth is guaranteed to the face

Indications

Bio-reinforcement is recommended for patients who have already shown the first pronounced signs of gravitational aging of the skin, i.e. the oval has “floated”, overhanging folds have appeared. Peels and biorevitalization (deep hydration) will not cope with this problem, but bioreinforcement will come in handy.

The procedure is suitable if you need:

• corrected the oval of the face (the need arises after 40 years), reduce the volume of the cheeks or tighten them;
• restore facial contour in the temporal region;
• highlight the contour of the lips, cheekbones, lift drooping eyelids, remove the double chin;
• get rid of deep wrinkles on the forehead and in the nasolabial triangle;
• correct facial asymmetry;
• make the skin in the neck area more elastic, remove the rings of Venus.

Stages of bioreinforcement

Preparation for the procedure

The doctor performing the procedure collects all information about the general health of the patient and, in particular, the condition of the skin. 2 weeks before bioreinforcement, the intake of blood-thinning drugs and vitamin E ends. To reduce the risk of hematoma formation, for individual indications, the drug “Ditsinon” is prescribed.

Bioreinforcement technique

The procedure is carried out quickly. To begin with, the cosmetologist cleanses the patient’s skin, the injection sites are preliminarily anesthetized, and a special mesh is placed on the face to accurately administer injections into problem areas. There are three standard schemes for bioreinforcement: reinforcement against aging vectors, injections according to a honeycomb pattern (used to smooth the skin in different directions), triangle reinforcement is used to rigidly maintain the skin. A course of bioreinforcement usually consists of 3-4 procedures, carried out once a month.

Recovery after bioreinforcement

After the procedure, you should limit exposure to the sun; bioreinforcement is often carried out in the cold season. You should refrain from visiting baths and saunas. In the coming months after the procedure, you should avoid facial massage. To relieve hematomas and swelling, it is recommended to use Heparin, as well as, as prescribed by a doctor, the use of special drugs for better restoration of the skin.

Bio-reinforcement of the face - what is it?

Microinjections of a drug containing hyaluronic acid are injected under the skin. The gel penetrates the tissue and begins to slowly dissolve. During this period, hyaluronic acid attracts a large number of water molecules, due to which fibroblasts are activated. This changes the appearance of the skin: it becomes firmer, more elastic and toned.

The cosmetologist injects the drug according to such a pattern so that a mesh is formed in the deep layers of the dermis. The acid creates a strong frame that “holds” the skin and makes it visually younger. The effect does not appear immediately, but several weeks after the first procedure.

IMPORTANT ! To achieve the maximum visible result, you need to do 2-5 procedures with an interval of 2 weeks. Duration of 1 session – 45-60 minutes. The effect lasts 1-1.5 years. Bioreinforcement is done before the age of 50, after which they resort to more radical methods of rejuvenation.

Contact only trusted clinics and an experienced specialist, because your appearance and health depend on this.

How does a bioreinforcement session work?

To administer the drug, the cosmetologist uses a syringe with a very thin flexible needle - a cannula. Its tip is rounded, so it does not injure the tissues, but pushes them apart, making its way forward. Thanks to this structure of the needle, cells and vessels remain intact. The procedure causes minimal pain, even if it is introduced into the deep layers of the dermis.

Stages of vector lifting:

• The cosmetologist determines where the drug will be injected. Markings are applied to these areas.
• Cleanses the skin of cosmetics and impurities.
• Apply anesthetic to the face. Most often it is a cream with lidocaine. If the patient has a low pain threshold, local anesthesia in the form of injections can be used.
• Disinfects the skin with an antiseptic.
• Injects hyaluronic acid into the marking areas.
• Punctures are treated with an antiseptic and sealed with a band-aid.

Bio-reinforcement of the face with Silhouette lift threads

Silhouette lift threads are combined in composition and have a non-absorbable base on which polylactic acid cones are attached to tighten skin tissue.
In addition, the threads stimulate the formation of new collagen fibers, an additional natural aid in skin rejuvenation. Silhouette lift threads are inserted under the skin, secured at the temples and at several points on the lower part of the face, then tightened. After the procedure is completed, the puncture sites are treated with an antiseptic; no traces remain. The procedure is performed under local anesthesia. Often the results can be seen immediately after the session, but the positive effect of biothreads will reach its maximum after 4-6 months.

Skin care after bioreinforcement

Immediately after the session, swelling and small bruises may occur, sometimes pain persists. Schedule the procedure during vacation or before the weekend so you can be at home during the recovery period. For 3 weeks, give up active sports, facial massage, hot water treatments, swimming pools, saunas or steam baths. It is better not to sunbathe or stay in the sun for a long time.

You must not touch your face with dirty hands, and you must not rip off any crusts that have formed. The puncture sites should be treated with an antiseptic morning and evening for 3 days; bruises can be lubricated with special gels (for example, Lyoton 1000). It is undesirable to use decorative and caring cosmetics. Control your facial expressions: don’t wrinkle your forehead, don’t purse your lips, don’t clench your jaw.

If you follow all the recommendations, the skin will recover in 5-7 days. To minimize side effects, follow these rules:

• Do not perform bioreinforcement before or during menstruation.
• Two weeks before the procedure, stop taking anticoagulants, vitamin E and non-steroidal anti-inflammatory drugs.
• The doctor may recommend drinking Dicynon 3 days before the session. The drug prevents the occurrence of capillary bleeding.
• For frequent relapses of herpes, take antiviral drugs (Acyclovir, Virolex or Zovirax) a few days before vector lifting.

Already on the third day after bioreinforcement, your face will look much better, and you will see the rejuvenation effect in 3-4 weeks.

Application areas

Bioreinforcement is widely used for primarily aging areas: the skin of the face and neck. In cosmetology, there is the concept of “turkey neck,” when, due to decreased turgor, the skin hangs in the décolleté area and reveals a woman’s age. In this case, the procedure eliminates this drawback.

The term “bio-reinforcement” itself came to us from the construction industry, and means “frame”, “strengthening”. This definition is also found in nail services, where they also resort to the procedure of bio-reinforcement of nails. Naturally, completely different technologies and materials are used there. For nail extensions, a special natural preparation is used - fibroin, isolated from silkworm threads, in combination with a polymer corrector.

Use of hyaluronic acid

Hyaluronic acid, as you know, is part of many tissues in the body, and is a kind of magnet for water molecules. It is known that one gram of hyaluronic acid can hold up to 6 liters of water! Therefore, it has found wide use in cosmetology; preparations based on it are natural for the skin; hypersensitivity reactions to its administration rarely occur. In addition to maintaining skin elasticity and hydration, hyaluronic acid stimulates the synthesis of collagen and elastin fibers, which allows you to maintain youth longer.

Bioreinforcement with liquid threads

Liquid hyaluronic threads are an excellent alternative to mesothreads, but in their structure they are not threads. They contain a salt of hyaluronic acid combined with zinc. After injection, liquid threads trigger the process of fibrosis in the skin, due to which the connective tissue becomes denser, creates a natural framework of the skin, and wrinkles are smoothed out. This technique is called vector lifting.

Liquid threads cause less tissue damage, puncture sites are practically invisible and heal quickly. They can be used in various areas where sagging and sagging skin is observed: in the abdomen, shoulders and thighs.

Recommendations before and after the procedure

Recommendations before bioreinforcement are standard for such cosmetic procedures. You should stop taking anticoagulants and non-steroidal anti-inflammatory drugs for two weeks. A cosmetologist will identify possible contraindications, and in some cases it is possible to prescribe agents that strengthen the vascular wall before the procedure.

After the rejuvenation course, you must refrain from sleeping on your face, visiting a bathhouse, sauna, solarium, or facial massage, as this all triggers the process of breakdown of hyaluronic acid. It is advisable to refrain from intense physical activity for 3 weeks.

Rehabilitation period

The recovery period after bioreinforcement, as a rule, does not last long; swelling and slight swelling at the injection site disappear within about 5-7 days. Your doctor may recommend medications to reduce these symptoms. A good method to combat swelling is ice.

Advantages and disadvantages of the method

Pros:

• the procedure is painless and harmless to the body;
• there is no foreign material in the tissues, as in the case of bioreinforcement with threads;
• the effect lasts up to 18 months;
• short recovery period;
• the risk of scarring is minimal

Minuses:

• you have to wait for the result;
• the need to carry out a whole course of procedures;
• Often women expect to see a greater effect than may actually be the case.

Side effects are not excluded. In addition to swelling and hematomas, patients may experience:

• allergy to the components of the drug;
• lumps of gel under the skin;
• inflamed nodules (granulomas);
• embolism – blockage of blood vessels by foreign particles.

If you do facial bioreinforcement in a proven place, then the risk of side effects is minimal.

Types of bioreinforcement

Today there are many cosmetic products that are aimed at improving the condition of the skin, but the same creams are not able to penetrate deep into the layers of the skin and correct the cause of superficial problems. This is precisely why a bioreinforcement procedure is carried out, the effect of which is aimed at the deeper layers of the skin, stimulating the production of collagen naturally. There are several types of this procedure: bioreinforcement with hyaluronic acid and polylactic acid, which are delivered using fillers, as well as bioreinforcement with threads, which has become less popular in recent years. Let's look at the features of each type in more detail.

• Bioreinforcement with fillers with hyaluronic acid. This type of rejuvenation procedure is the most popular and is in great demand among women from all over the world. Hyaluronic acid is involved in the microprocesses of skin cells, so after its administration through injections, these processes are accelerated, the skin is saturated with moisture and becomes more toned. During bioreinforcement, gels with hyaluronic acid are injected under the skin and form a whole network of connective tissue strands that support and strengthen the skin. Hyaluronic acid molecules attract water molecules, thereby moisturizing the skin. To obtain a more lasting and effective result, bioreinforcement with fillers with hyaluronic acid must be carried out in several stages with an interval of 1-2 months.
• Bioreinforcement with polylactic acid fillers. Fillers with this substance are aimed at stimulating the production of collagen by skin cells. Such drugs affect deeper layers of the dermis than fillers with hyaluronic acid. Therefore, bioreinforcement with polylactic acid has a longer lasting result and is more pronounced. Accordingly, the price for bioreinforcement with fillers with polylactic acid will be higher.
• Bioreinforcement with threads. A few decades ago, the procedure for bioreinforcement of the neck, face and décolleté was carried out only with the help of threads. The action of the threads is that after getting under the skin for several weeks, they are enveloped in tissue and a kind of capsule consisting of collagen and elastin is formed around them. For some time, the threads hold the connective tissues in a taut position; subsequently, they themselves are able to create tone and increase the elasticity of the skin. The threads can be very different. Cosmetologists use biodegradable threads made of polylactic acid and caprolac, as well as non-absorbable ones made of gold or platinum, suture material and Teflon. The most well-known preparations include LightLift, ResorbLift threads, Aptos, Gore-Tex threads. All threads can differ in appearance: they can be smooth, embossed, with cones and knots. According to numerous reviews, bioreinforcement with threads allows you to achieve a more pronounced effect and long-lasting results. This type of rejuvenation is recommended for women with significant age-related skin changes. The effect lasts up to 5 years, but the cost of this procedure is quite impressive.

Contraindications

Vector lifting is prohibited in the following cases:

• bearing a child and lactation period;
• taking antibiotics;
• skin diseases in the facial area, inflammation of the epidermis;
• tendency to form keloid scars;
• autoimmune diseases;
• blood clotting disorder.

A person may not be aware of many diseases. Before the procedure, it is important to take a general blood test and consult a dermatologist.

Technique for vector face lifting, cheekbones

The procedure is done in a certain order:

• The face is freed from cosmetics. The skin is treated with an antiseptic and an anesthetic cream is applied, covering it with a film for 30 minutes.
• After its removal, markings are applied in the form of equilateral diamonds connected to each other. Then the newly formed collagen framework will look like a network covering the entire face.
• Injections are given according to the schedule. Additionally, using the bolus technique, the drug is injected into the cheekbone area to restore volume to them.
• Wipe the skin with an antiseptic. Cold is applied to the face for a short time, after which an anti-inflammatory cream is applied.

To learn how the vector lifting procedure using RADIESSE works, watch this video:

The best preparations for bioreinforcement

The cosmetologist selects a vector lifting product after assessing the condition of your skin. For one procedure, 1 ml of the drug is often enough. Often, clinics have already purchased bioreinforcement products, and you need to pay for the doctor’s work and the drug. The average cost of 1 session is 15,000-25,000 rubles. If you want to save a little, order filler separately (but find out which one you need first) and pay only for the services of a cosmetologist.

Drugs

Bioreinforcement is carried out with new generation drugs, each of which has its own advantages.

1. Hyaluronic acid

If preference is given to bioreinforcement of the face with hyaluronic acid, the filler acts superficially and is aimed at restoring the lack of hyaluronic acid in the skin, filling it with moisture, and strengthening the skin.

2. Preparations based on polylactic acid

If bioreinforcement is performed with drugs based on polylactic acid, these substances are aimed at stimulating the production of new collagen in cells. These drugs are characterized by deeper penetration into the skin than hyaluronic acid. Accordingly, the result of such lifting will be more pronounced.

To correctly select the optimal option in a given case, you must listen to the advice of the doctor who will perform the procedure.

Bio-reinforcement of the face: before and after photos

It is much more interesting to immediately look at the result. The following pictures demonstrate how effective a course of bio-reinforcement with hyaluronic acid is.

Article Rating

Bioreinforcement of the face and neck - popular drugs

Cosmetologists have a large list of various drugs that can be used in the bioreinforcement process. Each of them has an almost similar composition and is aimed at strengthening and tightening the skin, stimulating collagen production. Let's consider the characteristics of the most popular preparations with hyaluronic and polylactic acid among cosmetologists.

• The drug "Ellanse". This is a French-developed drug that is used for deep skin tightening and correction of facial contours. It consists of hyaluronic acid with the addition of silk threads. This mixture is called polycaprolactone and is most often used in microinvasive aesthetic surgery.
• Perfectha Derm. This drug consists of hyaluronic acid in a liquid state and is used to correct grade 2 and 3 wrinkles. Cosmetologists often use the drug for bioreinforcement under the eyes, nasolabial folds and forehead area.
• Preparation "Princess". This drug was developed to have a deep effect on the layers of the skin. The effect of bioreinforcement with such a filler is comparable to the use of Botax, with the exception of injury to the nerve endings. The skin looks tightened and it is possible to create volume to the lips and cheekbones, thereby correcting the oval of the face.
• Juvederm Ultra. Cosmetologists use this drug for superficial or mid-level effects on the layers of the dermis. Most often they undergo bioreinforcement of the neck, cheeks and chin.
• The drug "Restylane Vital". One of the most popular preparations for bioreinforcement among cosmetologists. It is this gel solution that creates a dense frame of threads almost immediately after the session, so you can immediately see the result.
• The drug "Sculptra". This drug consists of polylactic acid and silk threads. Available in powder form, which is diluted with water before the procedure. The effect is stronger due to the fact that after injection a very dense frame of fibers is created. It is enough to carry out bioreinforcement with such a preparation once every 5 years.

Bioreinforcement of the face and neck - description of the procedure

The bioreinforcement technique depends on the problem area of ​​the skin and the drug chosen by the doctor. The sequence of the rejuvenation procedure is almost the same.

• The very first stage will always be a consultation with a dermatologist-cosmetologist, who will collect your complete medical history, carefully examine the skin, clarify the presence of various diseases and identify possible contraindications.
• Good clinics will definitely do an analysis of your body’s reaction to the injected drug. A small part of the drug is applied to the inner bend of the elbow and left in this state for some time. If redness does not appear, the procedure can be carried out.
• The procedure is always performed on an outpatient basis, so you will first be assigned a time convenient for you.
• First of all, the doctor uses a mild product to remove makeup and all impurities from the patient’s face.
• After this, a painkiller must be applied to the treated area. When using fillers with hyaluronic acid, it is enough to apply gel with lidocaine. This cream is applied in an even layer and left for about 30 minutes. You can also use a film for pain relief, which is slightly stronger than the cream. If threads are used during bioreinforcement, local anesthesia or, in some cases, general anesthesia may be required.
• Next, it is necessary to remove the effective anesthetic cream from the target area and treat this area with an antiseptic.
• One of the most important stages in the process of bioreinforcement is the application of a special marking scheme, according to which gel threads or metal threads will be introduced.
• Next comes the turn of the bioreinforcement itself, which is carried out with special syringes - conulas, which have a longer needle, which ensures a painless procedure and more accurate injection of the gel. On average, 1-2 syringes of gel are enough for one procedure, it all depends on the area of ​​skin being treated.
• After the procedure, the doctor treats the area where the threads were inserted with a special antiseptic.
• One procedure can take a total of 30 to 120 minutes.
• When using hyaluronic acid-based gel, several treatments may be needed to achieve maximum effect. Usually 3 sessions are enough, which take place every 3-4 weeks.

Bioreinforcement - video of the procedure

The effect of the bioreinforcement procedure

To achieve the final result, sometimes several procedures may be needed, after which you will see dramatic qualitative changes.

• The skin will become moisturized and its tone will increase.
• The contours of the face will become clearer, sagging areas of skin will disappear.
• Fine wrinkles completely disappear after the procedure.
• Deep wrinkles become less noticeable.
• The skin on the treated area will become firmer and more elastic.
• The overall condition of the skin and its texture will improve.
• Skin color will become natural and fresh.

Bioreinforcement - before and after photos

You can more clearly see all the qualitative changes after the bioreinforcement procedure in the photos below. This method of skin rejuvenation allows you to abandon plastic surgery and safely tighten the skin in problem areas and improve its condition on an outpatient basis.

Bioreinforcement of the face and neck - reviews

• Taisiya, 40 years old. For a long time I was afraid to admit to myself that my skin was no longer the same: there were many small wrinkles, slightly sagging cheeks and a sharply visible nasolabial fold. I tossed between a large number of procedures until I decided on bioreinforcement, as I considered it the most optimal for my age and the safest. The procedure went quite quickly, I didn’t feel any particular pain. It took me three procedures, after which I couldn’t believe my eyes - the skin became elastic, tightened, hydration and some kind of inner glow returned. For the first wrinkles, bioreinforcement is the ideal solution.
• Olga, 35 years old. I encountered the problem of sagging eyelids and the corners of my eyes, although I thought that this would happen a little later. I knew about such a method as bioreinforcement from a friend who had already used this procedure and was satisfied. I needed two procedures, after which I forgot about my problems.

Every woman tries with all her might to delay the approach of old age and resorts to a variety of methods and procedures. Bio-reinforcement is considered one of the most effective and safe skin rejuvenation techniques for people aged 35 to 50 years, which will allow you to postpone gravitational aging and enjoy young and radiant skin for a long time.

Positive and negative aspects of bioreinforcement

To fully understand the features of bioreinforcement of the face and neck, it is important to take into account all the positive and negative aspects of the procedure.

Advantages of bioreinforcement:

• First of all, this procedure can be an excellent replacement for plastic surgery.
• The effect of bioreinforcement is visible almost immediately. When using threads, you can see the result immediately after the procedure. For effective results after using fillers with hyaluronic acid, several sessions are necessary.
• The effect is quite long-lasting - with hyaluronic acid up to 12 months, with threads up to 5 years.
• The bioreinforcement procedure is considered virtually painless. It is enough to lubricate the treated area of ​​skin with lidocaine gel.
• Using this procedure, you can smooth out the facial skin and tighten it, you can also remove wrinkles and a double chin.
• When using threads, even after the procedure, you can change their tension.

Disadvantages of the procedure:

• If threads are used, this is a rather expensive procedure.
• Minor side effects may occur in the form of swelling and redness, which disappear within a few days.
• Feeling of discomfort and tightness when using threads.
• With constant use of hyaluronic acid, long-term swelling may form.
• To obtain a better result, you may need from 2 to 8 sessions. This applies to the use of drugs with hyaluronic acid.