Where to make a bunker? Peculiarities of pricing for DOT therapy

What it is

The CO2 laser was first used back in 1964. Back then it was used for cutting soft metals and engraving fusible surfaces: rubber or plastic. Later he migrated to medicine, in particular to surgery, and a few years later - to cosmetology. There it was used to grind the skin, which was essentially a controlled burn of the entire surface. But this procedure was traumatic and often led to serious side effects.

After lengthy research and search, the Italian company developed the “SmartXide DOT” device, which is unique in its properties. It breaks the thinnest continuous infrared beam, the wavelength of which is 10600 nm, into thousands of microbeams - fractions. They penetrate deep into the tissues, minimally damaging the surface protective layer of the epidermis.

What is DOT rejuvenation?

The procedure is carried out using French laser equipment using the latest technologies. The “SmartXide DOT” system has become a universal remedy in the fight against a number of aesthetic problems caused by skin aging due to the natural biological aging of connective and muscle tissues. Hardware cosmetology is aimed not only at highly effective effects, but also at reducing complications during the recovery period, side effects and shortening the rehabilitation process itself. DOT is a very popular cosmetic procedure, despite the fairly high cost of treatment.

To achieve a rejuvenating effect, cosmetologists use the influence of a carbon dioxide laser with a special wavelength. Through fractional beam laser luminescence, restoration processes are launched in the deep layers of the skin, namely:

• blood flow and lymph flow are restored;
• the production of collagen and elastin increases;
• regeneration of connective tissue is enhanced;
• nodular connections that form pigment spots and vascular networks on the skin of the face resolve;
• skin turgor increases.

How it works

A laser operating in this mode instantly heats cells to a temperature close to 100°C and evaporates water from them, simultaneously provoking denaturation of proteins. This leads to a sharp reduction in collagen fibers and the formation of very thin channels at the sites of laser-melted cells.

The skin becomes inflamed and has to actively regenerate in order to quickly repair multiple damages.

As a result of this heat shock:

• the primary effect of instant skin tightening occurs;
• active cell division is stimulated;
• the process of phagocytosis is launched to remove the remains of destroyed tissue.

In fact, the skin is completely renewed from the outside and inside. But at the same time, there is no extensive wound surface and the risk of infection of the treated area is minimized, since the high temperature ensures complete sterility during the procedure.

Laser system Smart Xide CO 2 – ingredients for success

The secret to the success of this laser equipment is high selectivity and a gentle, powerful effect. Dot radiation technology creates myriads of tiny areas on the skin in which old skin is destroyed, making room for new skin. A special DOT scanner selects the strength and direction of the impact, which allows you to achieve high efficiency with minimal trauma. Since the surrounding tissues are not damaged during such laser exposure, the regeneration process occurs very quickly.

With the help of the Smart Xide CO 2 laser system, it has become possible to rejuvenate particularly sensitive and difficult to treat areas of the face and body - the neck, décolleté, and area under the eyes. New technologies have even made it possible to rejuvenate the backs of the hands, making them soft and youthful. If it used to be believed that a woman’s age is revealed by her hands and neck, then new technologies completely refute this statement. Now ladies can look however they want.

Indications for use

Due to the fact that the intensity of the effect is easy to precisely adjust, and the laser beam is divided into fractions and minimally damages the skin surface, the DOT rejuvenation technique can be used on almost any part of the body, including eyelids, hands, décolleté and neck. But most often, this is how the face is tightened and tidied up.

The technology is very effective as a means of combating:

• deep facial folds;
• multiple small wrinkles;
• drooping upper eyelids and eyebrows;
• sagging neck and double chin;
• loss of clarity of facial contour;
• shallow pigmentation;
• scars after surgery or acne;
• stretch marks after pregnancy and weight loss.

Most often, to obtain the desired effect, which lasts up to several years, only one procedure is enough. But sometimes you have to create an individual treatment schedule and repeat sessions every 4-6 weeks.

Indications and contraindications for the procedure

Dermal-optical thermolysis is deservedly considered one of the most gentle methods of hardware cosmetology, but, despite this, it has a number of contraindications. These include:

1. Oncopathology.
2. Benign neoplasms.
3. Pregnancy and lactation period.
4. Epilepsy.
5. Any inflammatory skin processes.

Also, temporary contraindications to dot therapy include deep and medium chemical peels performed less than 14 days ago.

Fractional skin resurfacing is recommended for all patients facing the following problems:

• age-related skin changes in the face, neck, décolleté or hands;
• scars, scars, stretch marks, including the effects of post-acne, stretch marks on the mammary glands;
• hyperpigmentation, whether it be banal freckles or melasma.

Pleasant “block by block” effects of dot rejuvenation can be the disappearance of dark circles under the eyes, improvement of complexion, smoothing of facial wrinkles, etc. This procedure can also be used to increase the effectiveness of dermatological treatment.

Advantages and disadvantages

If you understand what DOT rejuvenation is, then it is, in essence, an improved laser resurfacing technology. But with the traditional method, 100% of the skin surface is damaged, but only 25% is damaged. Accordingly, the rehabilitation period is significantly shortened and facilitated, although it is still present and longer than after conventional photorejuvenation or other, more gentle procedures.

The undoubted advantages of DOT rejuvenation are:

• the ability to individually and very accurately configure the device for each client;
• clear limitation of the treated surface area;
• complete absence of damage to neighboring tissues;
• avoiding covering injured areas;
• quick and long-lasting effect after the procedure.

In experienced hands, the device can work successfully even on very thin and sensitive skin. The main thing is that the patient has no contraindications.

One of the main disadvantages of DOT rejuvenation technology is that it is painful for the client. One way or another, it is impossible to avoid pain when the skin is suddenly heated. And even after using anesthesia, the procedure is quite unpleasant. But the session lasts no more than 15-20 minutes, so you can be patient a little.

The disadvantages include the high price. But today it cannot be different, since expensive equipment is used for DOT rejuvenation, specialists undergo mandatory training and pass a certification exam, and many other important details are taken into account: disposable instruments and accessories, the cost of painkillers, etc. .

Possibilities of DOT rejuvenation

Thanks to the gentle effects of the device, it is possible to carry out a rejuvenating procedure even in the most delicate areas:

• eyelids;
• neck;
• décolleté area;
• Hands.

Unlike other procedures, when using DOT rejuvenation technology, the laser affects a certain area only 1 time. This further reduces the risk of possible complications and significantly reduces the exposure time of the device. For example, treatment of problem areas of facial skin takes only 10-15 minutes, depending on the desired effect. To achieve the greatest effect of laser fractional rejuvenation, the specialist conducting the examination always draws up an individual treatment program.

Preparation and execution

Any procedures using a laser require little preliminary preparation, starting with a mandatory initial consultation with a specialist. During it, the condition of the skin is assessed, the effectiveness of this type of influence is determined, and the presence of contraindications to the procedure is revealed through a survey.

No less important are the correct actions of the patient during the rehabilitation period, which lasts from several days to two weeks.

Before the procedure

If there is any damage to the integrity of the skin or a fresh tan, the procedure will have to be postponed. Two weeks before it, you can’t visit the solarium, and 7-10 days before, you can’t go to the sauna, swimming pool, or do chemical peels.

To reduce swelling, it is also better to quit smoking and alcohol at least 3-4 days before DOT rejuvenation. During this period, you should not take anticoagulants and retinoids.

When going to the salon, you should not smear your skin with creams. And on the previous day, make any masks, use grainy peels and apply decorative cosmetics. If you are prone to severe allergies, it is better to do a test in advance to determine the tolerance of the anesthetic used and photosensitivity. If the patient is too anxious, he may be allowed to take a mild sedative.

Execution Process

The procedure begins with preparing the patient and thoroughly cleaning the facial skin. Hair is tucked under a bandage or cap, eyes are protected with special dark glasses. For pain relief, an anesthetic ointment is usually used. It begins to act within a few minutes after application.

When the sensitivity of the skin is reduced, a conductive gel is applied to it, and the cosmetologist begins treating problem areas with the head of the device, which generates a laser beam when the button is pressed. It is necessary to walk over the skin only once, so the session rarely lasts more than 10-15 minutes.

Immediately after it, the remaining gel is removed from the skin and a soothing mask or cream with panthenol is applied to the face. They are kept for up to 15-20 minutes. Then the face is cleaned again, treated with an antiseptic and, if there are no complications, the patient can go home.

Rehabilitation

Depending on the depth and area of ​​skin damage during the procedure, it recovers from several days to 2-3 weeks. As a rule, there is no severe pain, but on the second day an unpleasant feeling of tightness appears. After two days, multiple crusts form.

It is very important to ensure that they do not dry out too much and that the skin does not crack. To do this, 2-3 times a day the face is lubricated with moisturizing creams and anti-inflammatory ointments, which are usually prescribed by a doctor.

Severe redness and swelling disappear within a maximum of 3-4 days. If this does not happen, it is advisable to consult a specialist to avoid serious complications. In order for the skin to recover as quickly as possible, you need to treat it very carefully and follow these recommendations:

• watch your facial expressions for several days so as not to injure the skin;
• do not take hot baths or wash your face with running water for 2-3 days;
• a week after DOT rejuvenation, you cannot swim in pools and open water;
• for two weeks you should limit physical activity and avoid the sauna;
• it is advisable to completely eliminate alcohol and smoking for at least 3-5 days after the procedure;
• You cannot do facial massage, homemade masks or any salon procedures.

You will have to protect your face from ultraviolet radiation until the upper layer of the epidermis is completely restored, which takes 21 days. During this period, you can go out into the sun only after applying a cream with a UV filter of 30 or higher to your skin.

After the procedure

After the procedure, you should intensively moisturize the skin for 2 weeks. It is advisable to use creams with a protective sun protection factor for a month if the procedure was carried out in the cold season and for 1.5-2 months if the procedure was carried out in the sunny season. You should also refrain from sunbathing and visiting a solarium for the same time. To enhance the rejuvenation effect, dermatologists and cosmetologists recommend combining DOT therapy with procedures. Particularly good results are shown by the combination of DOT rejuvenation, biorevitalization and botulinum toxin or Dysport injections.

Having compared the effectiveness and safety of techniques such as laser resurfacing and DOT therapy, we at Altermed settled on the second option, which combines the best qualities of ablative and non-ablative lasers.

Contraindications:

• oncological diseases at the site of the procedure;
• pregnancy;
• herpes in the active stage.

DOT therapy is a serious procedure, as serious as laser resurfacing. It is prescribed only after an in-person consultation with a doctor.

Contraindications and complications

If the procedure was performed by a qualified specialist using high-quality certified equipment, and the patient has no contraindications to it, negative consequences and side effects are extremely rare.

DOT rejuvenation technology is not used for:

• oncological and autoimmune diseases;
• the presence of metal implants in the affected area;
• active form of the herpes virus;
• skin diseases on the face;
• purulent form of acne;
• blood clotting disorders;
• tendency to form keloid scars;
• heart, liver, kidney failure;
• hypertension and diabetes mellitus 2-3 degrees;
• elevated body temperature for any reason.

Since the skin is heated to high temperatures, and there is no mechanical damage during the procedure, infection of the treated areas can only occur through the fault of the patient himself. Under no circumstances should you pick out the formed crusts or apply decorative cosmetics in the first days after rejuvenation.

You should start worrying if redness and swelling do not go away on the 3-4th day of rehabilitation, when wet cracks or sores begin to appear on the skin, a strong burning sensation or other unpleasant sensations appear. You should not try to cope with the problem on your own. A specialist will do this faster and without the risk of developing additional complications.

DOT therapy or fractional photothermolysis

Return to list of services

Get rid of wrinkles? Shrink enlarged pores? Restore a smooth and toned appearance to your skin? Eliminate stretch marks and scars?

All this is possible with the help of DOT therapy or FRACTIONAL PHOTOTHERMOLYSIS!

The use of the CO2 laser fractional photothermolysis method is possible on any area of ​​the skin, but it is especially effective for the face, neck, and décolleté. The technology makes it possible to successfully perform non-surgical facelifts, remove wrinkles, and make the skin firmer and more elastic.

In fractional photothermolysis, laser light is applied to the skin in the form of a beam of more than a hundred micro-rays. Each of them acts on a microscopic area, removing old skin cells and activating the formation of young ones. At the same time, cells unaffected by the laser remain around. They join the natural process and begin to intensively reconstruct the damaged area. Thus, the skin on the treated surface is “reborn” - new skin is formed with all the properties of youth, without traces of previous imperfections.

In one session, an average of 25% of cells are renewed. And in a course of 3-6 procedures with an interval of one month, complete rejuvenation and elimination of all surface defects occurs

Result:

• Clean, smooth, fresh skin;
• Natural skin rejuvenation;
• Absence of unwanted pigmentation and other signs of aging;
• Skin tightening;
• Elimination of any wrinkles;
• Reducing the use of everyday cosmetics;
• Fast rehabilitation;

Process description:

Feelings during the procedure:

Most of our patients o during the procedure.

Preparation:

No special preparation required. However, it must be remembered that this procedure must precede any injection methods of skin correction. The use of laser rejuvenation after injecting the drug into the skin can speed up the process of its resorption.

Time and number of procedures:

Preliminary anesthesia takes 30 minutes. The duration of the subsequent procedure of fractional photothermolysis with a CO2 laser depends on the area of ​​the treated area, but on average it is 10-30 minutes. The procedure can be performed once. However, the most reliably effective and most popular course of laser rejuvenation consists of 2-3 procedures. The interval between procedures is 3 weeks.

Equipment:

Laser device SmartXide DOT.

Drugs used during the procedure:

A 0.05% chlorhexidine solution is used as a disinfectant. Pain relief is carried out with a proven drug - Emla cream.

Drugs recommended for use after the procedure:

For quick rehabilitation of damaged skin, Bepanten Plus cream is recommended.

To consolidate the effect of the procedure, speed up the skin restoration process and enhance the effect of the procedure, we recommend using external preparations with low molecular weight hyaluronic acid, which can be purchased in our clinic.

The best addition to this procedure, according to the clinic’s specialists, are plasma lifting and laser biorevitalization procedures.

Restrictions after the procedure:

After the procedure, it is recommended to avoid contact with water for 24 hours. During the rehabilitation period, which takes 5-7 days, it is advisable to exclude physical activity, baths and saunas. For 3 weeks - avoid direct exposure to sunlight and artificial ultraviolet radiation (solarium).

Contraindications:

• Pregnancy and lactation;
• Local inflammatory skin diseases;
• Infectious diseases during exacerbation and other diseases accompanied by fever;
• Systemic and autoimmune diseases;
• Labile mental state, mental illness;
• Parallel use of physiotherapy in this area.

Painfulness of the procedure:

The effect of the laser beam is painless, and the sensation from the laser beam is characterized by patients as a “hot breeze” and is easily tolerated.

Duration of the effect of the procedure:

The lasting rejuvenating effect lasts for at least 2-3 years. At the same time, with maintenance procedures once a year, it is possible to preserve the condition of young skin for a longer period of time.

Service cost:

The cost of the procedure is from 6,500 rubles.

Make an appointment

Reviews and results

According to the reviews of most patients, the use of the DOT rejuvenation technique really allows you to literally erase up to ten extra years from your face. If you do it regularly, you can extend your youth up to 50 and even 60 years. After this age, the procedure becomes ineffective, since the processes of natural skin regeneration are greatly slowed down.

You can see in detail how the procedure is performed in the posted videos. There are usually comments from specialists and detailed recommendations on how to behave during and after the session. The skin needs to be rejuvenated in this way every few years. Therefore, the high cost of the procedure is completely justified. Moreover, the risks for patients are minimal, and the result is noticeable to the naked eye.

Visible result

After the first session, patients who attended DOT rejuvenation note that they look younger, and scars, stretch marks, scars and other aesthetic defects have disappeared from the skin. To ensure that the treatment effect does not disappoint, it is better to pay due attention to finding a specialist who will carry out the manipulation. Only specialized cosmetology centers and aesthetic medicine clinics have the right to perform laser fractional rejuvenation if they have the appropriate license.