Modeling cheekbones and cheeks using contouring

What's happened

Correction of facial contours in cosmetology using contour plastic surgery involves the introduction of special compounds under the skin. When biosubstances penetrate into the epidermis and dermis, voids are filled and the natural restoration process is activated at the cellular level. Due to this, an increase in tightness, restoration of metabolism and faster tissue regeneration are achieved. The skin becomes tightened, facial contours become clearer.

Modern materials used during the procedure do not pose a danger to the human body and do not provoke the development of an allergic reaction. In addition, in most cases, the biogel takes root well and is not rejected. Thanks to the active components present in the composition, the production of natural collagen and elastin fibers is activated, and the overall condition of the skin improves.

Among the main advantages of such plastic surgery are low cost, versatility, safety, a short recovery period, a large selection of bio-compositions, and a minimum of complications.

Disadvantages include maintaining the results obtained for a short time, as well as the need to perform several procedures to achieve the desired effect.

Volumetric facial modeling. Each person receives an individual approach

In this article I would like to talk about contouring, or rather about one of its directions - volumetric modeling of the face. The method consists of introducing gels based on stabilized hyaluronic acid into different areas of the face and to different depths.

The goal of the method is to create or return lost volume to the face, improve facial contours, reduce the depth of folds, and harmonize the face.

In the modern concept, a young face is a voluminous face, but, of course, without extremes. Huge cheekbones and lips, moon-shaped faces with a complete absence of nasolabial folds are no longer relevant. The face is viewed as a whole, and not in its individual parts, and the cosmetologist, like a sculptor, can add volume where it is necessary.

A young face is shaped like a heart, that is, it is a triangle with its apex facing down, towards the chin, and its base up, towards the cheekbones. Unfortunately, with age, the face loses volume, adipose tissue moves lower under the influence of gravity, and part of it is simply resorbed, in other words, dissolved. And in these cases, you can resort to contour gels based on stabilized hyaluronic acid. Hyaluronic acid is a completely biodegradable, that is, resorbable material, but due to special treatment (stabilization), this resorption proceeds slowly, several months (from 6 to 12, sometimes up to 18 months). During this resorption, hyaluronic acid is broken down into shorter fragments, which hydrate and rejuvenate the skin in the areas where the gel was injected.

So, volumetric modeling. Let's look at specific examples. Patient S. Upon examination, there is a decrease in volume in the area of ​​the middle third of the face - in the area of ​​the cheeks and partly the cheekbones, with the formation of a bucco-zygomatic groove (also called the naso-buccal or middle buccal groove). For the procedure, 3 ml of contour gel was used (photos 1,2,3,4).

photo 1 photo 2 photo 3 photo 4

Patient M. Upon examination, preservation of volume in the area of ​​the cheeks and cheekbones is noted, however, the presence of the buccal-zygomatic groove gives the face a tired expression. In this case, 3 ml of gel was used to fill the cheek-zygomatic grooves and lift the tissues in this area (photo 5,6,7,8)

photo 5 photo 6 photo 7 photo 8

Patient A. has a small, compact face, with an initially small volume of subcutaneous fat in the buccal-zygomatic region and a well-defined buccal-zygomatic groove. In such cases, even a moderate amount of the drug is enough for a noticeable result. For correction, 1.2 ml of gel was used (photo 9,10,11,12)

photo 9 photo 10 photo 11 photo 12

Patient L. also has a compact face with a slight flattening in the cheek area and a shallow, but still visible, buccal-zygomatic groove. The purpose of the correction was to fill the cheek-zygomatic groove and make the cheeks more convex and voluminous. The procedure required 1.2 ml of gel (photo 13,14)

photo 13 photo 14

Share

Indications

Correction of facial contours and double chin without surgery is possible for people regardless of their age. Moreover, thanks to such manipulation, problems such as tightening, leveling the relief, and restoring symmetry can be solved.

On this topic

• Contour plastic

Forehead contouring

• Olga Aleksandrovna Kalinina
• October 18, 2020

A cosmetic procedure is prescribed if there are problems such as:

• development of ptosis at the initial stage;
• formation of small wrinkles ;
• asymmetrical features;
• weakly defined cheekbones ;
• blurred contours .

Most often, facial oval correction with fillers is recommended for people aged 30-60 years. The method can be performed in combination with other injection procedures. In terms of effectiveness, it is in no way inferior to the results after a lift using surgical intervention.

Biomodeling Profhilo

Profhilo this summer!

Price:

-face/2 ml 18,000 rub.

-face+neck/4 ml

33,000 rub.

(or payment for 2 facial procedures)

We present to you a new innovative product that has greater capabilities than the usual filler. Biorevitalizant “Profilo” is produced using a special patented NANYCO heat treatment technology. The result was a drug containing the maximum concentration of hyaluronic acid. The patented technique allows you to regulate the amount of foreign toxic compounds and stabilizing agents. This affects the body’s reaction, which does not give allergic reactions to the components of Profhilo, reviews confirm this.

Compound

The product contains two types of hyaluronic acid, differing in molecular weight. Low is responsible for intense skin hydration, lightening of the skin surface, and smoothing out the relief. High is built into the tissue, creating a supporting frame for the skin. This approach helps to comprehensively influence age-related changes in the skin, achieving a “hydrolifting” effect.

Where and by whom is it produced?

The product is produced in Italy, but the main developer is considered to be the company IBSA, from Switzerland. It is known to many, as it occupies a leading position among others, according to experts, by producing products based on a combination of hyaluronic acid molecules.

The product was released in 2020. Over the years of its existence, it has been awarded three prestigious awards: as the best product, innovation of the year and once again, the best injection product. Today it is not difficult to buy Profhilo in Moscow.

Advantages of the drug

This development will be useful to those who are faced with the aging process. According to reviews, the Profhilo procedure will help correct sagging skin and remove signs of aging in the most difficult places along the contour of the face, on the neck, on the outer side of the hands and the inner surface of the forearm.

To understand why Profhilo is better than other biorevitalized drugs, it is worth paying attention to its ability to activate the activity of fat cells. This is an important point that helps eliminate age-related deficiency of subcutaneous fat tissue.

How is the procedure performed?

works hard on safe methods of administering drugs, so there is no need to worry about side effects. The method by which Profhilo is administered is called “5 points of injection”. This means that the product will be injected into suitable, safe locations away from important blood vessels and nerves. Visually it is almost invisible, there are no papules.

This method is considered not only the safest, ensuring a painless procedure, but also allows the substance to be evenly distributed in the tissues.

The procedure for introducing the gel itself does not take much time. The specialist will need ten to thirty minutes for the injections. For the drug to distribute smoothly and evenly, another two to three days should pass.

What you need to know about the Profhilo procedure

The patient's skin is immediately treated with an antiseptic to prevent the possibility of infection. The next step is injections. In fact, the procedure is painless, but if a person has a high pain threshold or simply does not want to feel even the slightest tingling, an analgesic cream can be applied.

Next, the points are marked. The specialist takes into account anatomical features. Administration of the drug begins only when all stages of preparation have been completed. A needle or cannulas are used and inserted into the deep folds of the dermis.

The final part is a massage. It is necessary for rapid stimulation and distribution of the active substance in the tissues.

How to give Profhilo injections

Before the injections are administered, you need to find out how many there will be. The amount depends on the area of ​​administration.

For the face you will need 2 ml of the drug, for the neck also 2 ml, for the décolleté another 2 ml. On each side of one zone there are five active points where the drug is injected.

For the inner surface of the shoulder, seven injections will be enough. For the brush, the “cannula fan” method is used, when only one injection is made, but the gel is injected along five vectors.

Profhilo course

It is discussed with each patient individually. It all depends on the pronounced degree of skin aging. The stronger it is, the longer the course. If we talk about the standard procedure, it is carried out in two stages, repeating every month, also using the “5 points of administration” method. In cases where the skin is in a state of severe aging, it is recommended to repeat another procedure after 60 days.

Rehabilitation period

If you look at the injections from the side of contour plastic specialists, you can note the simplicity of the procedure. Ten injections are not a serious intervention in the tissue, which means the healing process takes place almost instantly. The injection marks disappear in about thirty minutes. The first results can be observed after 2-3 days. Further, over the course of a month, the most effective stimulation appears, which lasts up to 8-10 months. The effect of Profhilo, reviews before and after confirm this, becomes less noticeable and the procedure needs to be repeated.

Undesirable effects

Profhilo underwent numerous tests before entering the cosmetology market. There is a high degree of biocompatibility. This means that there is almost no risk of serious adverse reactions. Some patients may experience slight bruising or redness in the areas where the punctures were made. People with a high pain threshold may experience minor pain or itching.

What awaits the patient after the Profhilo procedure?

After the correction course, according to reviews before and after:

• disappearance of wrinkles, skin sagging and folds;
• noticeable lightening of age spots;
• increasing skin tone;
• restoration of the volume and quantity of the subcutaneous fat layer.

To maintain the effect longer, you will need to completely avoid going to the solarium and spend less time in the sun. It is known that ultraviolet rays destroy collagen and lead to the breakdown of hyaluronic acid. It is worth protecting your skin from sun exposure. To do this you need to use protective creams.

Contraindications

Biorevitalization will be impossible in the following cases:

• for viral and fungal skin diseases;
• when there are scars and cicatrices in the places where the drug needs to be administered;
• for blood diseases;
• if there is an individual intolerance to any component;
• during lactation and pregnancy;
• if there are infectious diseases;
• oncology.

These are simple requirements that are met for most cosmetic procedures.

Precautionary measures

In order for the procedure to be beneficial with minimal side effects, you will need to follow some rules:

• Before going to the cosmetologist, do not drink alcohol the day before.
• Avoid taking anti-inflammatory drugs, including aspirin, a few days before.
• Do not touch the puncture sites on this day.
• Do not apply cosmetics to the area for three days.
• Protect the skin from wind and frost for seven days after the procedure.
• Do not go to the gym, sauna, swimming pool, or swim in bodies of water for the first three days after the injections.

Price of the Profhilo service at the Cosmetic Center Clinic

For Profhilo, the price in Moscow is not clearly fixed. Clients who purchase the course immediately can expect that the price for Profhilo will be reduced for them.

The cost of 1 procedure is 18,000 rubles. If you pay for 2 procedures, the cost will be 33,000 rubles.

Is there any difference from other drugs?

This drug does not contain alcohol, as is the case in skinboosters. The profile contains a large amount of hyaluronic acid, which is its undeniable advantage - 32 mg/2 ml. The consistency is a highly fluid gel that can penetrate complex anatomical areas of the face. Reducing the injection points of the drug makes it possible to do this procedure “on the go”, during your lunch break!

Contraindications

Despite the safety and minimally invasiveness of the method, there are certain limitations to its use. Thus, the following pathological conditions are considered the main contraindications:

• immune diseases ;
• herpetic rashes;
• chronic diseases that occur in an acute form;
• ARVI and acute respiratory infections;
• predisposition to the formation of keloid- type scars;
• clotting disorder .

Correction is also not allowed during pregnancy and breastfeeding.

Indications, contraindications, rehabilitation

At a young age, volumetric modeling of the cheekbones is most in demand, but a visit to the clinic can be caused not only by changes in the middle part of the face. Some good reasons include:

• soft tissue ptosis;
• reduction of the red border of the lips;
• decreased skin turgor;
• congenital or acquired asymmetry.

Like any intervention, volumetric modeling has a number of contraindications. During the initial examination, a complete medical history is collected, the necessary examinations and consultations with specialists are prescribed. The success of the result largely depends on your honesty.

Contraindications include:

• blood clotting pathologies;
• tendency to form keloid scars;
• local inflammation in the treated area;
• pregnancy, breastfeeding;
• autoimmune, endocrine diseases;
• chronic processes in the acute stage;
• febrile conditions, viral, infectious diseases.

Modern medicine solves most of these problems, and volumetric modeling is available to a wide range of people.

The procedure is attractive due to its short recovery period. Mild swelling, hematomas, and pain disappear spontaneously. At first, it is recommended not to disturb the treated areas, avoid solarium, bathhouse, swimming pool for two weeks, and limit physical activity.

Fillers used

To perform contouring, the specialist uses various types of drugs, each of which has its own characteristic features.

Synthetic

The peculiarity of such fillers lies in the versatility of the components that are included in the composition. The product is based on silicone, paraffin or polyacrylamide. Their main property is that they are not able to be excreted from the human body naturally. This is precisely what explains their use in cases where a permanent effect is required.

Among the main disadvantages is the low level of bioinertness of the components, which often causes the development of side effects, for example, inflammation or allergies.

Biosynthetic

They are based on biological, chemically modified elements. These cocktails contain a high proportion of soluble collagen, polycaprolactone and hydroxyapatite. They may also contain synthetic components - carboxymethylcellulose, polymethyl methacrylates.

Thanks to natural components, natural cell regeneration processes are launched, and synthetic ones help fill voids and replenish the missing volume in tissues.

Biodegradable

Such drugs have a temporary effect and can be completely eliminated from the human body. The main advantage of these compounds is that they are almost never accompanied by complications. The main components of fillers are lactic and hyaluronic acid, collagen.

The cosmetologist decides which drug to choose in a particular case. At the same time, he takes into account the general condition of the skin in the problem area, existing limitations, and the patient’s wishes.

Modeling compounds

Changing the volume and shape of the cheekbones is carried out using special preparations, called fillers in cosmetology. At their core, they are liquid fillers that simultaneously perform two functions: physical replenishment of volume, launching regeneration processes. The exact principle of action is determined by the composition used.

Fillers based on hyaluronic acid (HA)

The most popular and largest group. Represented by fillers: Surgiderm 30 XP , Juvederm Voluma , Restylane SubQ , etc. The hyaluronic acid in them is of synthetic or animal origin, combines well with the patient’s body, completely disintegrates over time and does not accumulate. Improves skin hydration, attracts water molecules, which fill voids, and indirectly improves collagen synthesis. For contouring, fillers with a high concentration of HA are used, thus achieving a prolonged result.

Sculptra

A preparation based on polylactic acid of non-animal origin. A safe biodegradable substance that produces a gradual but pronounced result for up to 2 years. The principle of action is based on the active production of natural collagen and elastin, which compensate for the lack of volume, simultaneously giving the skin elasticity and density.

Radiesse

A professional drug actively used in medicine to compensate for the deficiency of soft tissues. Produced on the basis of calcium hydroxyapatite. The substance is identical to that found in human bone tissue. Provides visible results immediately, simultaneously provoking neocollagenesis, as a result of which the achieved effect lasts for up to 3 years.

Preparation

Before performing filler correction, the doctor must examine the client, ask him about previously performed cosmetic procedures, and about the likelihood of developing allergies to certain drugs. It is also important to assess your overall health.

On this topic

• Contour plastic

Consequences of fillers

• Olga Aleksandrovna Kalinina
• October 18, 2020

Laboratory testing may also be required, which includes:

• general blood analysis;
• coagulogram;
• biochemistry;
• test to assess the level of clotting ;
• on the tendency to exhibit an allergic reaction.

If there are no restrictions on the manipulation, the cosmetologist, together with the patient, determines the date and time of the correction and gives subsequent recommendations for preparation.

In a few weeks, you will need to abandon any cosmetic procedures that could lead to skin injury. Within a week you will need to quit smoking, drinking alcohol, coffee and strong tea.

You should not subject your body to heavy physical activity, including sports. An equally important condition is a review of the diet. Products such as marinades, semi-finished products, and snacks should be excluded from the menu.

About 14 days in advance, doctors advise you to stop taking any medications. If this is not possible, the cosmetologist should be informed about this.

Main stages of the procedure

Manipulations do not require prior preparation. It is not recommended to combine contouring with other aggressive cosmetic procedures. It is also recommended to avoid blood thinning foods and medications a week before the session.

The procedure itself lasts no more than an hour. The cheekbone area is cleaned of surface contaminants and treated with an antiseptic. The next stage is exposure to local anesthesia, and only then a series of injections.

Marking before the contouring procedure

Fillers are contained in sterile disposable syringes of various sizes. The drugs are administered in small doses in several injections. Then the specialist performs acupressure, causing the substance to be evenly distributed under the skin.

Introduction

An aesthetic surgeon or dermatocosmetologist performs facial oval contouring. Before the manipulation, he fills out an injection passport, which contains information with the name of the drug, the amount of the required volume, correction zones and the date of implementation. This document is given to the patient. It will need to be provided at subsequent visits to the beauty salon.

First, the surface of the skin is cleaned of decorative cosmetics, sebaceous secretions and other contaminants and treated with an antiseptic solution. Next, a gel with an anesthetic effect is applied to prevent discomfort during manipulation.

After the anesthetic has taken effect, the specialist proceeds directly to the injection of fillers at previously designated points. To do this, he can use the classic method (needles) or cannulas.

On this topic

• Contour plastic

Care after contouring

• Olga Aleksandrovna Kalinina
• October 18, 2020

Finally, the skin is wiped again with an antiseptic. A light massage is performed to evenly distribute the biogel.

On average, the procedure takes from 30 minutes to an hour, after which the patient is sent home.

To correct the shape of the face and double chin, fillers with hyaluronidase, which have a dense consistency, are used.

The technique chosen is “fern”. The needle is inserted perpendicularly with a cut in the center into the middle layers of the dermis at 1/2 or 2/3 of the length. The grid method will be no less effective for this task. Using this technology, injections are administered at a distance of 3 millimeters from each other.

Next, the second row is performed, but in a perpendicular position relative to the first. As a result, a dense frame is formed, which provides support for soft tissues and prevents them from sagging.

Preparations for contouring

Hyaluronic acid

Photo: Pexels.com

Contour plastic surgery using hyaluronic acid eliminates signs of aging, corrects the contours and oval of the face, and changes the shape of the nose. Such fillers are biocompatible, consist of natural components and are excreted from the body. Hyaluronate comes from organic matter, which guarantees its excellent compatibility with human tissue. The acid is safe for health, gives quick results and rarely causes adverse reactions.

Indications:

• Lip rejuvenation
• Fighting wrinkles
• Forms a clear oval face
• Restores skin elasticity

The effect lasts for a year. An example of a hyaluron-based filler is Restylane. When injected into the skin, the filler accumulates water molecules and smoothes the skin.

Hydroxyapatite based fillers

They provide a triple effect: improve the appearance of the skin, have a tightening effect and eliminate wrinkles. They cause active production of their collagen, are easily absorbed by the body and do not migrate. The validity period is two years.

A week before plastic surgery, you should stop taking medications and take a course of antiviral drugs. This will reduce the risk of swelling and herpes after surgery. It is also recommended not to drink alcohol and follow a diet.

Fillers are injected into the skin by intradermal or subcutaneous injection.

The plastic procedure includes:

• Cleansing the skin from dust and impurities
• Treatment with an antiseptic to disinfect and avoid infections
• Anesthesia (painkiller is administered)
• Marking of application points (cosmetologist marks areas for injections)
• The injections themselves
• Disinfection (treatment with cleansing agents after surgery)

Two hours after completion, the patient returns to the usual rhythm of life. No special treatment is required, but a number of restrictions will have to be observed to speed up skin healing. You should refrain from playing sports, visiting baths and saunas. Avoid hypothermia and do not temporarily use cosmetics. Massage and alcoholic drinks are prohibited.

Possible negative phenomena:

• The occurrence of allergies
• Poor circulation and tissue necrosis
• The appearance of scars and inflammation
• Puffiness of the face (in case of incorrect filler dosage)
• Most of the negative consequences occur only if the drug is incorrectly selected or applied incorrectly

Complications

After the manipulation, early and late side effects may appear. The first group consists of swelling, hematomas, redness of the skin at the injection sites, pain, inflammation and itching. Such conditions are considered a normal reaction and disappear on their own after a few days.

The greatest danger is a delayed complication - granulomatosis, which can be caused by non-compliance with the administration technique or an incorrectly selected agent.

Do you have hollows in your temples?

If so, you may notice how much older your face looks, your forehead appears larger, and your cheekbones appear too narrow. Don't overlook this common problem that frustrates many women. Consider cosmetic procedures to help you look younger.

Most hollows have a slight concave cavity, but deep hollows can give your face an old, unhealthy appearance. Correction of the temporal zone can provide treatment for this area of ​​the face. With the help of correction, you will get a balanced silhouette with a smoother transition to the hairline, which will make you look more youthful.

Facial oval modeling points with Juvéderm® VOLUMATM

There are 5 main points for modeling the oval of the face, injections into each of which have a specific effect:

• point Jw1 is the angle of the lower jaw. Injecting the drug into this point can make the face both more masculine, by expanding the lower third, and emphasize the clarity of the oval of a woman’s face with age-related loss of volume in this area, by emphasizing the angle of the lower jaw and thereby creating lifting;
• point Jw2 – pre-auricular area, the injected drug has a lifting effect and reduces sagging skin (“jowls”);
• point Jw3 – body of the lower jaw, injections into this point allow you to achieve a smooth contour of the oval of the face;
• point Jw4 – premaxillary groove. The administered drug reduces its severity;
• point Jw5 – the top of the chin, filler injections into which increase the height of the chin.

Thus, the injection of Juvéderm® VOLUMATM with Lidocaine into the above 5 points allows you to achieve a pronounced result in modeling the oval of the face.