Glyton preparations for intradermal and volumetric modeling of the face

The French cosmetic house Pierre Fabre, using extensive research experience, has created an innovative therapeutic monophasic gel for contour correction Glytone. This is a hyaluronic filler produced using BioActiPolyMatrix technology (BAMT), which increases the stability of HA. Glytone not only rejuvenates, it “works every day”, strengthening and moisturizing the skin. Despite its delicacy, the drug at the same time provides effective correction. Let's try to figure out how it is similar to its analogues and how it differs from them.

Glytone: ANALOGUES

- the most appropriate analogue is Stylage, which, like Glyton, contains mannitol, but all preparations based on monophasic stabilized hyaluronic acid - Belotero, Teosyal, CRM, Princess, Reneall, etc. can be classified as similar

Glytone 1: characteristics and results of application

Glytone 1 contains unstabilized hyaluronic acid (14 mg/ml) and 34 mg/ml magnetol, as well as glycerin and phosphate buffer.

The drug is used for biorevitalization, so it can be used at any age, usually from 25 years. Glytone 1 is administered over several months (the amount is determined by a cosmetologist) every 30 days, and provides the following effect:

  • light skin lifting;
  • smoothing out minor wrinkles;
  • moisturizing and improving skin condition;
  • restoration of elasticity and turgor;
  • narrowing of pores;
  • improvement of complexion.

The drug is injected into the skin of the face, as well as the neck and décolleté.

The skin rejuvenation effect lasts for three months.

The price of one procedure in Moscow and St. Petersburg, depending on the cosmetic clinic, ranges from 11,000 rubles per 1 ml, which is enough for one rejuvenation session.

Glytone: about the drug

Glytone series preparations are designed for comfortable, atraumatic correction of wrinkles. The composition of the drug optimally combines hyaluronic acid and 6-hydric alcohol mannitol, which inhibits the process of acid destruction, due to which the long-lasting effect is maintained.

Glytone fillers simultaneously perform the following tasks:

1. It corrects wrinkles of varying severity and restores volume

2. Glyton starts the process of formation of new collagen, while simultaneously inhibiting the destruction of its own collagen fibers. Consequently, the skin is tightened, and the result is maintained even after the expiration date; 3. Mannitol contained in the drug does not allow hyaluronic acid to disintegrate, which ensures that there is no effect of volume “falling” in the first days after correction, and also allows you to maintain long-term activity of the drug (up to 24 months). The hyaluronic acid used in the gels is produced according to strict European quality standards, and the filler has also passed all the stages of control that currently exist for similar preparations. The above measures are a guarantee of the safety and highest quality of the product. Glytone eliminates the need for preliminary allergy tests and is completely biodegradable, leaving no traces. Due to their plasticity, the gels do not require intensive kneading at the end of the procedure, which significantly reduces the risk of hematomas.

Features of Glytone fillers include the presence of unstabilized hyaluronic acid in the composition, which provides a biorevitalization effect in the area of ​​drug administration, which is an additional powerful factor in neocollagenogenesis.

Glytone 2: characteristics, injection zones and results

Glytone 2 consists of 80% unstabilized and 20% stabilized hyaluronic acid with a concentration of 20 mg/ml. Glyton 2 also contains mannitol (41 mg/ml) and phosphate buffer.

Glyton 2 is recommended for people over 30-35 years old.

The main purpose of this filler is to fill small wrinkles, including facial wrinkles, located on the surface of the skin. Most often, the drug is injected into the area around the lips. The drug is also used for bioreinforcement and facial contouring or in combination with other anti-aging procedures.

The course of rejuvenation and restoration includes 4-5 sessions, which are carried out once every 30 days. The rejuvenation effect lasts up to one and a half years.

The price of 1 ml Glytone 2 in Moscow and St. Petersburg is on average 13,000 rubles.

The Glytone line consists of four drugs, three of which are fillers:

Biorevitalizant Glytone 1 is created on the basis of unstabilized HA (14 mg/ml), the actions of which are complemented by the 6-atomic alcohol mannitol, phosphate buffer and glycerin. This injection drug is recommended for use from 25 years of age. Recommended course: 1 procedure per month. The gel smoothes and tightens the skin, significantly improves complexion, restores its elasticity, and tightens pores. The achieved effect lasts for 3-4 months.

Glytone 2 Consists of unstabilized and stabilized HA in a ratio of 80/20% (20 mg/ml), mannitol and phosphate buffer are also present among the active ingredients. This gel is recommended for patients over 30 years of age. It delicately smoothes out fine wrinkles and is also successfully used for bio-reinforcement (course: 1-2 procedures per month for a period determined by a cosmetologist). Inserted using 30G½ and 27G½ needles. Maintains the achieved result for up to 8-15 months.

Glytone 3 Consists of unstabilized and stabilized HA in a ratio of 85/15% (23 mg/ml). Recommended for use by patients over 30 years of age. The most popular filler in the line, it is aimed at working with folds and deep wrinkles, such as nasolabial folds, horizontal creases on the forehead, marionettes, and tear troughs. Optimal chickens: 2-3 times with a break of 15-30 days. If you want to prolong the effect, you should repeat the procedures for 3 or 4 months depending on your age. Inserted with a 27G½ needle. The result remains unchanged for up to 15 months. Glytone 4 is based on stabilized HA at a concentration of 24 mg/ml. Recommended for patients over 30 years of age. This gel is designed to correct the shape of the face and replenish lost volume. Gel Effectively eliminates folds, deep wrinkles, replenishes deficiencies in the soft tissues of the face, and corrects cheekbones. Course: 2-3 procedures with a break of 15-30 days for 3 months. Inserted using 25G 5/8 and 23G 11/4 needles. The effect lasts up to 24 months.

Filler composition

Elasticity and viscosity in ideal proportions are the hallmark of Glytone. Filler components:

  • hyaluronic acid (hereinafter HA) with a density of 20-24 mg/ml;
  • mannitol (6-hydroxy alcohol);
  • cross-linking agent (in this case butanediol diglycidyl ether).

The concentration of stabilized HA in Glyton fillers depends on the labeling of the drug. The biorevitalizant from this line contains only 14 mg/ml of unstabilized HA. The role of mannitol is to preserve HA and prevent its premature destruction or biodegradation. The concentration of cross-linking agent in Glytone maintains the viscosity required for a particular type of correction.

The balanced composition of Glytone Professional fillers guarantees a harmonious restoration of the microvolume of the skin and its smoothing. Therefore, their use is indicated not only when the first more or less pronounced signs of aging appear, but also in the correction of scars, to eliminate age spots, post-acne scars, etc.

Glytone: contraindications

The above-described drugs are contraindicated in patients with individual intolerance to the components, during pregnancy, lactation, as well as during exacerbation of chronic diseases, with any infectious diseases. The procedure should not be performed if inflammatory processes occur. In general, the plasticity of the gels makes the injection procedure painless; most patients note a visible result and the absence of bruises. In any case, before performing an injection, you should consult a doctor and contact only specialists.

Glytone 3: use and effectiveness of the drug

The most popular filler from the Glyton line, which consists of 85% stabilized and 15% unstabilized hyaluronic acid with a concentration of 23 ml/mg, and also includes mannitol (41 mg/ml) and phosphate buffer.

The drug is used to correct age-related skin defects for people over 30 years of age. In particular, Glyton 3 is used for:

  • elimination of labiomental and nasolabial folds;
  • filling deep wrinkles (forehead, corners of the mouth);
  • replenishment of tissue volume on the temples, cheekbones;
  • contour correction or lip augmentation with hyaluronic acid;
  • plasticity of the tear trough.

Glyton 3 allows you to eliminate all types of wrinkles and restore firmness, elasticity and hydration of the skin.

To achieve maximum effect, it is recommended to carry out 2-3 procedures once every 3-4 weeks. The effect of rejuvenation and restoration of natural facial contours lasts up to one and a half years. To consolidate and prolong the effect, it is recommended to carry out a consolidation procedure once every three to four months.

The price for administering 1 ml of Glyton 3 in clinics in Moscow and St. Petersburg ranges from 16,000 rubles.

Glytone: reviews

Most patients are very satisfied with the injections of this drug, some note faster absorption of the drug than stated. It is worth remembering that this may be due to both individual characteristics of local immunity and metabolism, and to procedures, for example, if a patient undergoes a course of hardware procedures after the introduction of a filler, and the field where Glytone is located is affected by the procedure, Don't be surprised that it will resolve faster. This is true for procedures that increase local blood circulation, especially those accompanied by heating. If you want to combine filler injections with hardware techniques without compromising the duration of its presence in the tissues, you can consider options for contour preparations based on polycaprolactone - Ellance.

Mechanism of action and indications for use

Glytone is a line of innovative multifunctional drugs that are designed for non-traumatic correction of age-related changes in the face. The preparations in this line are monophasic hydrogels, which include stabilized cross-linking agent (BBDE) and native (non-stabilized) hyaluronic acid and mannitol (sexahydric alcohol).

Mannitol performs the properties of an antioxidant, thereby stopping the process of enzymatic destruction of hyaluronic acid, and the combination of its two fractions in one preparation - native and stabilized - allows for the process of internal regeneration of the extracellular matrix and the prevention of skin aging.

The combination of mannitol and two fractions of hyaluronic acid allows you to use Glytone to fill wrinkles of varying depths, model the shape of the face, stimulate metabolic processes in the dermis (therapeutic effect) and correct scars.

Video: “The principle of action of Glyton 2, 3, 4 filler injections”

Sign up for a free consultation:

Glytone filler line

Glyton cosmetology preparations are available in two different variations of the nomenclature:

1) Glytone 1. Glytone 1

Glyton 1 is indicated prophylactically to maintain the natural beauty and youth of the skin, as well as to combat fine wrinkles. Cosmetologists advise taking a preventive course of biorevitalization with Glyton 1 gel twice a year from the age of 25. As a result, you will get a denser skin structure and strengthened facial lines. If a more pronounced correction is required, then Glyton is used in a course of 3 procedures, with a break of one month. Experts advise repeating the course no earlier than after 2 years.

2) Glytone 2, 3, 4. Glytone 2, 3, 4

Glytone 2, 3, 4 fillers are used to fill wrinkles, shape the contour and volume of the lips, restore the volume of tissue in the cheek-zygomatic area, and are also designed to combat superficial wrinkles, including expression lines, and are recommended for use after 30 years.

Glyton 2

– used to correct fine and shallow wrinkles. The course consists of 4 to 5 procedures, and the result will be noticeable immediately and will last up to 18 months.

Glyton 3

– a drug with a higher content of hyaluronic acid, it is more viscous, therefore it is used not only to correct wrinkles, but is also injected to fill the missing volume (when filling nasolabial folds and wrinkles in the area of ​​​​the inner and outer corners of the eyes - “crow’s feet” wrinkles). The course consists of 3-4 procedures with an interval of 3 weeks. The effect lasts up to six months. Cosmetologists advise repeating the course no earlier than after 4 months.

Glyton 4

– the most concentrated in the line of drugs. It is able to reduce deep wrinkles, as well as solve problems of plastic facial correction. The composition is selected in such a way that it promotes the production of its own collagen, aimed at slowing down skin aging and maintaining the effect of the drug. The course consists of 2 procedures with an interval of a month. The result lasts up to two years.

How is the Glayton filler procedure performed?

The drug is administered only with disposable syringes. To reduce pain during the procedure, it is recommended to use anesthetics. After introducing Glytone gel, the cosmetologist gently massages the skin with his fingers to distribute the drug into the tissues. During the day, you may feel a slight tingling in the injection area, redness and slight swelling may be observed on the skin, which will quickly subside.

After the procedure. Restrictions

For several days after the procedure, you must follow simple hygiene rules: avoid decorative and skincare cosmetics, do not visit the pool and sauna, reduce physical activity, and it is not recommended to drink alcohol.

Contraindications:

  • age under 18 years;
  • oncological diseases;
  • autoimmune diseases;
  • allergic reactions to drugs for local anesthesia (lidocaine, etc.);
  • pregnancy and lactation;
  • acute infectious diseases;
  • inflammatory processes in the skin.

Before use, it is better to consult a cosmetologist.

Cost of the drug Glytone in Moscow

The average price of Glyton filler in Moscow is 13,000-15,000 rubles per volume - 1 ml

(one syringe). One volume is enough to correct the shape of the lips, recreate lost volume in the middle zygomatic area, biorevitalization... For more pronounced corrections of an older face, 2-3, and sometimes 4 volumes are required.

Skin care after

After contour plastic surgery or biorevitalization, you will need to follow a number of simple rules that will reduce the risk of infection through injection wounds, the appearance and growth of edema and hematomas. To do this you will have to:

  • postpone visiting the pool for at least 2 days;
  • reschedule visits to the sauna, solarium, steam room, and any thermal procedures for 3-4 days;
  • reduce physical activity and completely avoid bending work for 3-4 days;
  • limit the use of decorative cosmetics for 2 days;
  • very carefully, barely touching the skin, apply cosmetics to the skin of the face and completely eliminate massage and self-massage for 4 days.

In order to protect the skin from adverse effects and prolong the effect of Glyton injection preparations, Merz has developed a line of products for daily use.

The products contain vitamins C and E, red tea flavonoids and glycolic acid. You can see how the tools work in our next video.

Video: Glytone Review

You can underestimate the effect of properly selected daily care at a young age (up to about 25 years). Then it is better to entrust skin care to professional cosmetics, which are designed, among other things, to prolong (extend) the effect of injection and hardware procedures.

Curious to know if Juvederm Ultra 3 has negative reviews? Follow this link.

TEOSYAL is indicated for removing fine wrinkles from the surface of the skin, for working on the most sensitive areas of the face - the area of ​​crow's feet. Read on.

How is the procedure performed?

Stage 1: Pain relief. Anesthesia is always performed, except in cases where the patient himself refuses local anesthesia. For this, several products can be used, such as Emla cream or Light Dip. The analgesic (pain-relieving) effect of the drugs develops 30 minutes after application.

Stage 2: Administration of the drug. The technique for administering the drug depends on the density of the gel, its purpose, the type of cosmetic defects on the client’s skin (linear wrinkles, lack of subcutaneous tissue, etc.). Sometimes injection techniques are combined. The video below shows the procedure for introducing the gel into the lower eyelid area.

Stage 3: Completion of the procedure. According to the recommendations of the manufacturer Glyton, after completing the injections, a light tissue massage is allowed to evenly distribute the gel in the tissues.

You should not wash your face or apply medications or cosmetics, so as not to provoke the development of an allergic reaction and not to introduce infection into the injection wounds. The only thing that can be done is to treat the injection sites with an antiseptic.

Video: Gel injection procedure

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends: